Small Hand Held Garden Hedge Trimmer | XH-HT6000
Product Overview
XH-HT6000 Handheld Gas Hedge Trimmer is a commercial-grade, lightweight professional hedge trimmer engineered for high-efficiency yard, orchard, and landscape management. Powered by a high-torque 22.5CC 2-stroke 1E32F engine, this portable tool delivers a potent 0.8 kW output to tackle thick bushes and dense twigs effortlessly.
As a globally trusted manufacturer, Xinghu Power supplies premium lawn maintenance machines that meet the strict mechanical, emission, and durability standards required by professional landscaping contractors and international B2B importers.
Core Advantages & Selling Points
Upgraded Deepened Cylinder & Enhanced Core Life
The XH-HT6000 integrates an upgraded 1E32F precision-machined cylinder block. By optimizing the inner cylinder scavenging channels, this small hedge trimmer generates higher combustion pressure and explosive trimming power while dramatically lowering emission outputs and extending engine service life under continuous workloads.
24-Hour Efficient Airflow & Heat Dissipation
Engineered for industrial landscaping demands, our small garden hedge trimmer features a high-velocity cooling fan structure. The optimized crankcase housing routes cold air directly over the engine block, allowing the tool to run non-stop without thermal loss, power drop, or accidental stalling.
Low-Resistance Quick & Easy Start System
Eliminate startup fatigue in the field. Equipped with a large rope pulley design and a rapid-ignition coil, this small garden trimmer achieves instant one-pull ignition even during cold-weather operations or following prolonged seasonal storage.
Ergonomic Safety Design & Heavy-Duty Performance
This small hand held garden trimmer balances an ultra-lightweight chassis (7.2 kg net weight) with an advanced anti-vibration rubber bumper assembly. It provides structural comfort for extended pruning shifts in gardens, farms, orchards, and municipal parks.
Core Technical Specifications
| Engineering Parameter | Technical Detail / Specification |
| Model Code | XH-HT6000 |
| Engine Configuration | 1E32F Single-Cylinder, Air-Cooled, 2-Stroke |
| Displacement | 22.5 CC (Compatible with 22.2CC specs) |
| Rated Output Power | 0.8 kW |
| No-load Operating Speed | 8000 r/min +/- 500 |
| Guide Bar Cutter Sizes | 20" / 24" (Optional configurations available) |
| Chain / Cutter Pitch | 3/8 - 7 |
| Starting Mechanism | Hand-pulled recoil-type rapid start-up |
| Fuel Requirements | Unleaded gasoline + 2-stroke oil (25:1 mix ratio) |
| Fuel Tank Capacity | 0.65 L |
| Oil Reservoir Capacity | 0.32 L |
| Gross Weight / Net Weight | 8.5 kg / 7.2 kg |
| Export Packaging Size | 54 * 52 * 32 cm (Standard Export Carton) |
| Customs HS Code | 84678100 |
Commercial Applications & Versatility
XH-HT6000 Gas Powered Hedge Trimmer is engineered to meet the intensive demands of commercial, agricultural, and municipal landscape maintenance. Its high-torque engine and optional 20"/24" dual-action blades make it the ideal choice for several high-volume applications:
-
Municipal & Urban Landscaping: Perfect for public parks, highway greenbelts, and corporate campus maintenance. This small hedge trimmer easily handles long shifts of dense shrub shaping and roadside hedge leveling without thermal degradation.
-
Commercial Orchards & Vineyards: Designed to assist fruit growers and agricultural managers in pruning overgrown fruit trees, shaping tea plantations, and clearing dense undergrowth in orchards where cordless or electric tools lack the runtime and power.
-
Professional Topiary & Estate Management: Delivers the precise, smooth cutting strokes required for intricate boxwood sculpting, privacy screen maintenance, and large-scale estate fence trimming.
-
Heavy Forestry & Brush Clearing: Acts as a vital companion for forestry teams and fire services to rapidly clear wild bushes, dense briars, and thick perimeter foliage, integrating seamlessly alongside other lawn maintenance machines.
Usage Guide & Safety Protocol
Pre-Operation Checklist
-
PPE Compliance: Always wear industrial gloves, safety goggles, and protective footwear before operating any lawn maintenance machines.
-
Fuel Blending: Mix unleaded gasoline (≥92#) with premium 2-stroke engine oil strictly at a 25:1 ratio. Fill the 0.65L tank. Never run the engine on pure gasoline.
-
Mechanical Check: Ensure the guide bar blades are sharp, clear of trapped debris, and securely bolted.
Start-Up Procedure
-
Toggle the engine rocker switch to the "ON" position and engage the choke lever.
-
Place the unit on a flat surface, grip the front handle firmly, and pull the starter rope smoothly until the engine pops.
-
Push the choke lever back down, pull the starter cord again to ignite, and let the engine idle for 30 seconds to warm up before cutting.
Storage & Maintenance
-
Post-Use Clean: Wipe away all sap, leaf residue, and moisture from the 20"/24" cutter blades.
-
Fuel Storage: If storing the unit for more than 30 days, drain the fuel tank completely and run the engine until the carburetor is dry to prevent fuel gumming.
-
Storage Location: Store in a dry, ventilated area out of reach of children.
About Xinghu Power Machinery Co., Ltd.
Yongkang Xinghu Power Machinery Co., Ltd. is an elite export manufacturer specializing in the R&D, production, and worldwide dispatch of high-quality forestry and garden machinery. With over 20+ years of industrial experience, our factory is located in Yongkang, China (the "Hardware Capital"), equipped with advanced automated assembly lines, high-precision CNC testing laboratories, and stringent quality control systems.
Global Supply Chain & Certifications:
-
Compliance & Licensing: Our product platforms comply with strict international benchmarks, supporting compliance paths for ISO, CE, GS, EPA, and EURO5 emission regulations.
-
Full-Cycle OEM/ODM Capacity: We support European and American distributors with complete custom configurations, proprietary colors, and tailored technical specifications.
-
Robust Logistics & Spare Parts: Our large-scale warehousing guarantees rapid lead times (4–20 days depending on order volume) and a 100% complete inventory of spare parts (carburetors, cylinders, piston sets, and starters) for seamless after-sales support.